how to convert altium designer pcb file to nc file

The selected tracks will still exist after the polygon pour has been created and will remain selected.įor Altium Designer to be a able to perform a track to room conversion, the outline must be correctly defined.This means you can define the shape on a mechanical Layer, then create the polygon pour on a signal layer. The polygon pour will be created on the current (or active) layer, not the layer that the selected tracks are on.Select the polygon to access its properties through the Properties panel (double-click on it if the panel is not visible), from where you can change its fill mode (to solid or hatched) and other associated properties, as required.

Select and move the polygon to its required location in the workspace. The polygon pour is drawn in outline only mode and is not selected. That means the outline must form a closed shape, with the ends of touching track segments correctly meeting (starting/ending in the same X, Y location).Īfter launching the command, a polygon pour will be created from the closed boundary formed by the track primitives. The shape of the pad will be set to Round.įor Altium Designer to be able to perform a track to polygon conversion, the outline must be correctly defined. The via's diameter size is used for the pad's XY sizing on the applicable layers.

The vias will be converted to free pads of the same style ( Simple, Top-Middle-Bottom, or Full Stack) and with the same hole size.

The properties for a pad can be edited through the Properties panel. Useįirst, ensure that all vias that you wish to convert are selected in the main design workspace.Īfter launching the command, the vias will be converted to free pads. This command is accessed from the PCB Editor by choosing the Tools » Convert » Convert Selected Vias to Free Pads command from the main menus. This allows proper connection to internal power planes, using editable pads. Changing vias to free pads can be useful when importing PADS-PCB and PADS 2000 files, where vias are used to connect to power and ground layers. A free pad is one that is not part of a parent component object.

This command is used to change vias into free pads. Applied Parameters: Action=ViasToPads Summary

How to convert altium designer pcb file to nc file